Pillow block bearing UCP212
Strong
Designed for a steady and alternating rotation
Ready to mount
Lubricated and sealed bearing
Quick locking onto the shaft
Cost-effective
Pillow (plummer) block ball bearing gadgets consist of an insert bearing set up in a solid iron housing that can be bolted to a aid surface. This variant is robust and stiff, and is appropriate for purposes with each steady and alternating instructions of rotation. It has an internal ring prolonged on each aspects and is locked onto the shaft with the aid of tightening a set screw on the internal ring, making it effortless to mount.
UCP212 is the assembly of pillow block P212 and insert bearing UC212.FYH technology.
Dimensions
Bearing width, total | 65.1 mm |
Centre distance between bolt holes | 184 mm |
Centre height (pillow block) | 69.8 mm |
Housing overall width | 62 mm |
Shaft diameter | 60 mm |
Performance
Basic dynamic load rating | 52.7 kN |
Basic static load rating | 36 kN |
Limiting speed | 2 700 r/min |
Note | Limiting speed with shaft tolerance h6 |
Properties
Bore type | Cylindrical |
Coating | Without |
Fastening bolt hole type | Plain |
Grease fitting | With |
Housing type | Pillow block |
Lubricant | Grease |
Material, bearing | Bearing steel |
Material, housing | Cast iron |
Number of bolt holes for fasteners | 2 |
Relubrication hole | With |
Retaining feature, inner ring | Set screws |
Rubber seating ring | Without |
Sealing type | Contact, standard |
Sealing, bearing | Seal and flinger on both sides |
Sealing, unit | Without |
