KF040CP0 Thin wall deep groove ball bearing
Radial contact ball bearings with seals or shields are designed to accommodate radial masses and some axial masses in both direction. One bearing sequence is based totally on a single go part which stays steady as the bore diameter increases, main to huge house and weight savings. The bearings are on hand with metric and inch boundary dimensions. Depending on the layout and sequence the bearings can be furnished with chemical and corrosion resistance.
KF040CP0 Thin wall deep groove ball bearing
Endure -way radial and a few axial hundreds
A thin move segment
Lightweight
Low friction
High hardness
High going for walks accuracy
Dimensions:
d | 101.6 mm | Bore diameter |
D | 139.7 mm | Outside diameter |
H | 19.05 mm | Radial cross section |
B | 19.05 mm | Width |
d1 | ≈115.697 mm | Shoulder diameter inner ring |
D1 | ≈125.603 mm | Shoulder diameter outer ring |
9.525 mm | Ball diameter | |
2.032 mm | Maximum radius of shaft or housing fillet |
Calculation data:
Dynamic load rating, Kaydon, radial direction | CK15.8 kN |
Basic static load rating, radial direction | C023.8 kN |
Mass:
Mass bearing≈0.86 kg
