Vernier
1. Simple and basic design
2. step scale panel can prevent dust intrusion between the main ruler and the ruler
3. small vernier surface tilt Angle (14℃), easy to read
4. the main ruler and the front end face of the ruler frame as 0 basis point (measuring surface), can be measured. Standard calipers can be used for outside, inside, depth and order of a total of 4 measurements
5. Calipers with cemented carbide claws are the best choice for measuring rough products, casting parts and grinding stones
Caliper /vernier is a measuring tool, composed of main ruler and vernier, used to measure length, inside and outside diameter, depth, has the function of measurement and inspection.
Its range is: 0~150mm, 0~200mm, 0~300mm, and so on, the general resolution (previously also called fractional value) is 0.02mm, there are also 0.1mm and 0.05mm, accuracy is generally ±0.03mm, there are also ±0.04mm and ±0.05mm.
