Thin wall bearing robot bearing KG160XPO-manufacture,factory,supplier from China

KG160XPO thin section bearing is a type of precision bearing that is designed to have a small cross-sectional area in relation to its bore diameter. This design allows the bearing to be compact and lightweight, making it ideal for applications with limited space or weight constraints.KG160XPO bearing is typically made from high-quality materials such as chrome steel or stainless steel and features a deep groove design with a maximum ball complement for optimal load-carrying capacity.

KF040CP0 Thin wall deep groove ball bearingEndure -way radial and a few axial hundredsA thin move segmentLightweightLow frictionHigh hardnessHigh going for walks accuracyDimensions:d101.6 mmBore diameterD139.7 mmOutside diameterH19.05 mmRadial cross sectionB19.05 mmWidthd1≈115.697 mmShoulder diameter inner ringD1≈125.603 mmShoulder diameter outer ring 9.525 mmBall diameter  2.032 mmMaximum radius of shaft or housing filletCalculation data:Dynamic load rating, Kaydon, radial d

Bearing KF090XPO thin section four-point contact ball bearingProvide different internal preloading and clearance according to customer's needs, such as high stiffness or zero clearance.This can be achieved by using larger ball bearings than the gap between the inner and outer ring raceways. Of course, even in the absence of external load, the ball and raceway will have a certain elastic deformation.Dimensions228.6 mmBore diameter266.7 mmOutside diameter19.05 mmRadial cross section19.05 mmWidth≈242.697 mmShoulder diameter inner ring≈252.603 mmShoulder

KC065XPO Thin section four-point contact ball bearingKC065XPO thin section four-point contact ball bearing is a kind of bearing that is best for purposes the place radial and axial masses have to be supported simultaneously. It has a cross-sectional thickness of 0.625 inches (15.875mm) and points four-point contact between the balls and raceways, which approves it to maintain giant radial and thrust loads.

KA020CP0 thin section four-point contact ball bearingRadial contact ball bearings with seals or shields are designed to accommodate radial loads and some axial loads in either direction. One bearing series is based on a single cross-section which remains constant as the bore diameter increases, leading to significant space and weight savings. The bearings are available with metric and inch boundary dimensions.

needle bearing is a type of bearing with cylindrical roller. Relative to its diameter, the roller is thin and long, so it's called needle roller. Despite having a smaller cross-section, it still has a higher load bearing capacity. These bearings are especially suitable for situations where radial space is restricted.HK1212  needle roller bearing, No inner ring. Fw: 12 mmD: 18 mmC: 12 mmr min : 0.8mm  Needle roller bearings are equipped with thin and long needle rollers (roller length is 3~10 times the diameter, the diameter is generally not larger than 5mm).

NK series is substantial needle roller bearing, No inner ring, whithout seals.Needle roller bearing has a small section, but has a higher load bearing capacity, needle roller bearing equipped with a thin and long roller (roller diameter D≤5mm, L/D≥2.5, L is the length of the roller), so the radial structure is compact.Its inner diameter size and load capacity and other types of bearings at the same time, the outer diameter of the minimum, especially suitable for radial installation size limited support structure.   All NK series bearings are available.The installation of fully l

This is a type of precision bearing that features a contact angle between the balls and raceway of 15 degrees.

Cylindrical roller bearing NJ2216E Brass cage. NJ2216E bearings are made of high-quality materials for superior strength and durability. Its cylindrical shape efficiently transmits radial forces, while its rolling motion ensures low-friction operation. This makes it ideal for applications where high speeds and loads are frequent.

SNU series housings. Bearing housing SNU513They allow the included bearings to reap maximum carrier lifestyles with much less want for maintenance.

Imperial Tapered Roller Bearing is a type of bearing that has a conical shape. It is designed to support axial and radial loads in one direction. The bearing is called imperial because it is usually made in inches rather than metric measurements. The outer ring and inner ring are referred to as the "cup" and "cone," respectively. These are matched sets of bearing components that are designed to work together.

The adapter sleeve is the most common bearing attachment used to fix bearings with tapered holes to cylindrical journal, and can be used on optical shafts or stepped shafts.

Pillow (plummer) block ball bearing gadgets consist of an insert bearing set up in a solid iron housing that can be bolted to a aid surface. This variant is robust and stiff, and is appropriate for purposes with each steady and alternating instructions of rotation.

SNU series housings. SN series housing. SNU532 SN housingCommonly used materials: cast iron, cast steelProduct specification: split bearing housing.Split bearing houzing is divided into SN200, SN300, SN500, SN600, (SNH, SNV, SNF, SNK, SNG, the requirements are the same, but different companies say different name), refered to as SN series bearing housing. For different applications of standard SD bearing housing, bearing housing of different materials can be selected, such as gray cast iron, ductile iron and cast steel bearing housing.

Ball bearing,Linear bearing,High precision bearing LM20UUThe linear bearing is composed of ball, cage, hardened shell and seals at both ends. Because the size of each part of the bearing has been standardized, it can be exchanged, and there is no need to worry about replacement after wearing out.The LM20UU is also highly versatile, as it is compatible with a wide range of machines and components.

Introducing the Spherical Ball Bearing 2212, a extraordinary bearing that is designed to supply most appropriate overall performance and reliability.

High precision 7215 Angular contact bearing7205AC is angular contact bearing with nylon cage. There are also steel and brass cage.The angular contact bearing 7215 has a bore size of 75mm, an outer diameter of 130mm, and a width of 25mm. It is commonly made of chrome steel or stainless steel and is designed to withstand high-speed and high-load conditions.

UCHA205 is a type of pillow block bearing. It's insert bearing with a housing outside.UCHA205 is mainly used in engineering machinery, machine tool, automobile, metallurgy, mining, petroleum, machinery, electric power, railway and other industries.

Tapered roller bearing 32224The tapered roller bearing 32224 is a single row bearing commonly used in heavy machinery such as trucks and large industrial equipment. It consists of an inner and outer ring with tapered raceways and tapered rollers, which allow the bearing to handle both radial and axial loads. The tapered design also reduces friction and ensures a smooth operation.

UCP205 Pillow Block BearingThe UCP205 pillow block mounted bearing with a 1" inside diameter, two bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts. This ready-to-mount unit has cast iron housing, and chrome steel bearings, and is designed for efficient operation at a wide range of speeds. The bearing has a dynamic (radial) load rating of 14 kN and a static (axial) load rating of 7.85 kN. This one-piece pillow block housing allows for stationary outer and rotating inner rings.

Taper roller bearing 32216 The cone Angle of the outer ring raceway of a single row tapered roller bearing is between 10° and 19°, which can face up to the combined action of axial load and radial load at the same time. The giant the cone Angle, the greater the functionality to undergo axial load. The bearing with large taper Angle, the rear code plus B, the cone Angle between 25°~29°, it can endure large axial load.

6202CE ceramic bearing, it's deep groove ball bearing. Diameter: Inner ring: 15mmOuter ring:35mmThickness: 11mmIt is one of the most widely used rolling bearings. It is characterized by small friction resistance, high speed, can be used to bear radial load or radial and axial simultaneous action of the combined load on the machine parts, can also be used to bear axial load on the machine parts, such as small power motor, car and tractor transmission, machine tool gear box, general machines, tools, etc

Introducing the HK 3030 High Precision Bearing 30x37 x 30mm Needle Roller Bearing HK3030 – a product that offers unparalleled quality and performance. Combining superior functionality with a commitment to customer satisfaction, this bearing is set to revolutionize the industry.Products DescriptionAt the forefront of innovation, our manufacturing processes ensure that every HK 3030 high-precision bearing meets the highest quality standards. We understand the importance of bearing precision and durability, so we invest in state-of-the-art technology and equipment.

The self-aligning ball bearing 1207 has an outer diameter of 72mm, an internal diameter of 35mm, and a width of 17mm. It has two rows of balls and is designed to permit for misalignment of the shaft relative to the housing. This kind of bearing is oftentimes used in functions the place there may additionally be moderate shaft deflection or misalignment, such as in conveyor structures or printing presses.