Ring-manufacture,factory,supplier from China

TC rubber oil seal is made of high quality rubber material, resistant to wear. It is designed to withstand high temperatures, pressure and harsh environments. In precision bearings, TC oil seals help prevent lubricant from escaping from bearings or specific areas.DIMENSIONS:Outer ring:  28mmInner ring:   12mmHeight:        7mmMaterial: Viton Ruber or nitrile rubber Color: Black or BrownTC oil seal is a double-lip radial seal equipped with a clamping spring that operates at low pressure to prevent impurities from entering.

Deep groove ball bearing is most widely used in industry. It includes one inner ring, one outer ring, and a group of balls and cage.

The metric tapered roller bearing is a separate type of bearing. It consists of an inner ring and an outer ring. Interior ring with roller and cage. Each inner ring and outer ring have tapered raceways. Tapered roller bearings include single - row, double - row and four - row structures. There are also metric and non - standard imperial systems.The capability of a single row tapered curler bearing to undergo axial load relies upon on the contact Angle, that is, the Angle of the outer ring raceway. The higher the Angle, the increased the axial load capacity.

Deep groove ball bearing 6304ZZIt's with inner ring, outer ring, cage, balls, seals.

Tapered roller bearing 32220 The cone (internal ring assembly) and cup (outer ring) integrate to form an entire unmarried tapered roller bearingSupports excessive radial masses and axial hundreds in a single route among a rotating and non-rotating memberRunning temperatures vary from -30 to a hundred and twenty degrees c (-22 to 250 ranges f)Sheet metallic cage flippantly spaces rollers for decreased friction, vibration, and noiseOpen configuration for lubrication applied in locationInner ring：100.000 mmOuter ring：180.000 mmThickness：46.000 mmAutomatic taper roller bearing install machine

Deep Groove Ball Bearing6305; 6305-2RS; 6305ZZ, 2RS type is rubber seal, and ZZ type is steel seal. Diameter: Inner ring: 25mmOuter ring: 62mmThickness: 17mmWeight: 235gpackaged wellEvery bearing is tested strictly before dispatch.

Full Complement Roller Bearings SL045018PP Full Complement Roller Bearings have two internal rings, the two internal rings are linked collectively by using the clamping ring, and can now not be separated, the outer ring has a center guard and can undergo two-way axial load, used as positioning bearings. Due to the giant distance between the two rows of rollers, it can additionally face up to the overturning moment.

Stainless Steel Deep Groove Ball Bearing  S6202-2RS S6206-2RS S6205-2RS S6002-2RS S6305-2RS  large quantity in stock.Stainless Steel Deep Groove Ball Bearing  includes one internal ring, one outer ring, and a collection of balls and cage.

NKI SERIES needle roller bearing, WITH inner ring. NK and NKI BEARING:The NKI series is with an inner ring.NK series is without an inner ring.Solid ring needle roller bearings have a compact structure, small radial size and large load capacity. They are suitable for parts with limited radial profile size. They can also be widely used when the shaft or shell has a swinging motion.

3203-2RS is angular contat ball bearing. It consists of inner ring, outer ring,balls and seals. -2RS type is rubber seals. Widely used in machine tools, metallurgy, mining, petroleum, chemical, electric power and other industries.DIMENSIONSMAIN DIAMETERd17mmD40mmB17.5mmBasic load ratingC14300NC08800NLimited load ratingPu365NLimited speed12000 r/minWeight96 gDouble-row angular contact ball bearings like the 3203-2RS are particularly useful for applications where there are both radial and axial loads present, as they can handle both types of forces simultaneously.

N213ECP Cylindrical Roller BearingSingle row cylindrical curler bearing, N designSingle row cylindrical curler bearings are designed to accommodate excessive radial hundreds in aggregate with excessive speeds. Having two vital flanges on the internal ring and no flanges on the outer ring, N sketch bearings can accommodate axial displacement in each direction.

SL182980 full complement Cylindrical Roller bearingsIt has two inner rings, which are connected together by the clamping ring, which can not be separated, and the outer ring has a middle guard side, which can withstand the two-way axial load and is used as a positioning bearing.

Spherical plain bearing GE50ESThe GE50ES spherical plain bearing is a type of radial plain bearing that consists of a spherical inner ring and a spherical outer ring, separated by a layer of lubricating material.

Taper roller bearing 32219Single row tapered roller bearings are designed to accommodate mixed radial and axial masses and furnish low friction all through operation. The internal ring, with rollers and cage, can be hooked up one after the other from the outer ring. These separable and interchangeable factors facilitate mounting, dismounting and maintenance.

Rod end bearing is spherical plain bearing with a rod end or mounted on the rod end. Its consist mostly of an inner ring with external sphere and an outer ring with internal sphere. Joint bearing is generally used in low speed swinging motion (namely, the angular motion.

Agricultural Machinery Ball Bearing W208PPB12,  Consists of one inner ring, one outer ring, and a group of balls and a cage. Additionally, it has unmarried row and double row types, open kind and sealed type (2RS and ZZ type).  Specifically designed for agricultural machinery such as tractors, harvesters and seeders, this bearing ensures optimum performance and durability.As primarily used in outdoor machinery, our agricultural machinery deep groove ball bearings 6000 are also designed to withstand severe weather conditions ranging from extreme heat to heavy rain.

30208series (unmarried row tapered curler bearings) (metric) include a tapered internal ring assembly and an outer ring. the inner diameter of 30208 is 40 mm. Its outer diameter is 80 mm. 30208 roller fabric is ball material. its seal kind is seal bearing.

This bearing is double row cylindrical  Roller Bearing.  It has two structures: cylindrical inner hole and tapered inner hole (K type). NN type bearing has no guard on the outer ring, the inner ring has a guard on both sides and a middle guard.

6142935YSX is gear reducer bearing, eccentric Bearing.DIMENSIONS:Inner ring: 25mmOuter ring:68mmThickness:42mmApplication: Reducer/reduction gearsAn eccentric rolling drive is a transmission with parallel but non-overlapping shafts, consisting of an eccentric rolling unit fitted with a CAM. The eccentric rolling drive consists of an input shaft 1 on which an eccentric rolling unit 2 is mounted, which in turn consists of an eccentric bushing and a ball bearing (Figure 1).

Tapered roller bearing  48684/48620The tapered roller bearing 48684/48620 is a single-row bearing normally used in heavy-duty purposes such as building equipment, mining machinery, and different massive industrial equipment. It consists of an internal ring, an outer ring, tapered rollers, and a cage to maintain the rollers separated and evenly spaced.

Spherical roller bearing 22220CCInner ring: 100mmOuter ring: 180mmThickness: 46mmThe bearing is an essential part of any machinery or equipment that requires smooth operation and reliable performance. Spherical Roller Bearings 22220CC are designed and manufactured to the highest standards and are known for their impressive load carrying capacity and excellent resilience under severe operating conditions.

Taper roller bearing HM89446/89410Single row tapered roller bearings are designed to accommodate combined radial and axial loads and provide low friction during operation. The inner ring, with rollers and cage, can be mounted separately from the outer ring. These separable and interchangeable components facilitate mounting, dismounting and maintenance. By mounting one single row tapered roller bearing against another and applying a preload, a rigid bearing application can be achieved.HM89446/89410 Dimensiond: 34.925mmD:76.200mmT: 29.370mmProduction line

Imperial Tapered Roller Bearing is a type of bearing that has a conical shape. It is designed to support axial and radial loads in one direction. The bearing is called imperial because it is usually made in inches rather than metric measurements. The outer ring and inner ring are referred to as the "cup" and "cone," respectively. These are matched sets of bearing components that are designed to work together.

Bearing KF090XPO thin section four-point contact ball bearingProvide different internal preloading and clearance according to customer's needs, such as high stiffness or zero clearance.This can be achieved by using larger ball bearings than the gap between the inner and outer ring raceways. Of course, even in the absence of external load, the ball and raceway will have a certain elastic deformation.Dimensions228.6 mmBore diameter266.7 mmOutside diameter19.05 mmRadial cross section19.05 mmWidth≈242.697 mmShoulder diameter inner ring≈252.603 mmShoulder